universal ac input / full rangebuilt-in active pfc function, pf>0.95 high efficiency up to 89% protections: short circuit / overload / over voltage / over temperature 5 years warranty withstand 300vac surge input for 5 secondscooling by free air convection built-in constant current limiting circuit 1u low profile 38mm built-in remote sense function specification hrp-150-3.3 hrp-150-5 hrp-150-7.5 hrp-150-12 hrp-150-15 hrp-150-24 hrp-150-36 hrp-150-48 model dc voltage rated current current range rated power ripple & noise (max.) note.2 output voltage adj. range voltage tolerance note.3 line regulation load regulation setup, rise time hold up time (typ.) voltage range note.5 frequency range power factor (typ.) efficiency (typ.) input environment inrush current (typ.) leakage current over temperature safety standards safety & emc (note 4) withstand voltage isolation resistance working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload over voltage protection ac current (typ.) 3.3v 5v 7.5v 12v 15v 24v 36v 48v 30a 26a 20a 13a 10a 6.5a 4.3a 3.3a 0 ~ 30a 0 ~ 26a 0 ~ 20a 0 ~ 13a 0 ~ 10a 0 ~ 6.5a 0 ~ 4.3a 0 ~ 3.3a 99w 130w 150w 156w 150w 156w 154.8w 158.4w 80mvp-p 80mvp-p 100mvp-p 120mvp-p 150mvp-p 150mvp-p 200mv p-p 240mvp-p 2.8 ~ 3.8v 4.3 ~ 5.8v 6.8 ~ 9v 10.2 ~ 13.8v 13.5 ~ 18v 21.6 ~ 28.8v 28.8 ~ 39.6v 40.8 ~ 55 .2v 2.5% 2.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5% 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 3000ms, 50ms/230vac 3000ms, 50ms/115vac at full load 16ms/230vac 16ms/115vac at full load 85 ~ 264vac 120 ~ 370vdc 47 ~ 63hz pf>0.95/230vac pf>0.99/115vac at full load 78.5% 85% 6 ~ 7v 9.4 ~ 10.9v 14.4 ~ 16.8v 18.8 ~ 21.8v 30 ~ 34.8v 41.4 ~ 48.6v 57.6 ~ 67.2v 87% 88% 88% 88% 89% 89% 2.3a/115vac 1.3a/230vac 35a/115vac 70a/230vac <1ma / 240vac 105 ~ 135% rated output power 3.96 ~ 4.62v protection type : constant current limiting, recovers automatically after fault con dition is removed protection type : shut down o/p voltage, re-power on to recover protection type : , recovers automatically after temperature goes do wn shut down o/p voltage ul60950-1, tuv en60950-1 approved compliance to en55022 (cispr22) class b, en61000-3-2,-3 compliance to en61000-4-2,3,4,5,6,8,11, en55024 , heavy indust ry level, criteria a , en61000-6-2 i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms / 500vdc / 25 / 70% rh -40 ~ +70 (refer to "derating curve") 20 ~ 90% rh non-condensing -50 ~ +85 , 10 ~ 95% rh 0.04%/ (0 ~ 50 10 ~ 500hz, 5g 10min./1cycle, 60min. each along x, y, z axes 238.8k hrs min. mil-hdbk-217f (25 ) 159*97*38mm (l*w*h) 0.61kg; 24pcs/15.6kg/0.76cuft file name:hrp-150-spec 2011-06-21 features : 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 5. derating may be needed under low input voltages. please check the derati ng curve for more details. for guidance on how to perform these emc tests, please refer to ?emi testing of c omponent power supplies.? (as available on http://www.meanwell.com) h r p - 1 5 0 s e r i e s 150w single output with pfc function 95 (3.3v ~ 7.5v) , 85 (12v ~ 48v) (tsw1 : d etect on heatsink q1 of power transistor) 105 (3.3v ~ 7.5v), 100 (12v ~ 48v) (tsw2 : d etect on heatsink hs4 of power transistor) emc immunity emc emission
mechanical specification case no.901i unit:mm ii terminal pin no. assignment : pin no. pin no. 12 4,5 3 6,7 assignment assignment dc output -v dc output +v fg ac/l ac/n 4.5 152.5 7 150 6.5 18.5 78 97 84.5 65 3.5 24 159 22 117 6-m3(both sides) l=6 9 28.5 3.5 2-m3 l=4 18 3.5 38 hrs df11-6dp-2dsa or equivalent connector pin no. (cn100) : assignment pin no. 12 3~6 assignment -s +s nc mating housing hrs df11-6ds or equivalent terminal hrs df11-**sc or equivalent 12 3 4 5 6 7 9.5 8.2 9 3.5 10 max. cn100 6 4 25 3 1 20 40 60 80 100 without cover with cover -40 0 10 20 30 40 50 60 70 (horizontal) h r p - 1 5 0 s e r i e s 150w single output with pfc function file name:hrp-150-spec 2011-06-21 derating curve output derating vs input voltage ambient temperature ( ) input voltage (v) 60hz ta = 25 85 100 125 135 155 264 100 90 80 70 60 50 40 load (%) load(%) block diagram fosc :100khz(3.3~7.5v) 70khz(12~48v) o.l.p. o.t.p. emi inrush active filter current limiting rectifiers & pfc i/p fg pwm pfc power detection switching circuit filter & rectifiers +v +s control control o.v.p. o.t.p. -v -s svr1
|
